ZyXEL Communications GS2210 series Handbook page 100

4 Set up Switch-2: Enter the web GUI. Go to Menu > Advanced
Application > Spanning Tree Protocol > Configuration. Check
if the Spanning Tree Configuration is Rapid Spanning Tree. If
not, select it and click "Apply".
5 Set up Switch-2: Enter the web GUI. Go to Menu > Advanced
Application > Spanning Tree Protocol > RSTP. Check the
"Active" box. Set the Bridge Priority = 20480. Active port 1, 2.
Click "Apply".
6 Set up Switch-3: Enter the web GUI. Go to Menu > Advanced
Application > Spanning Tree Protocol > Configuration. Check
if the Spanning Tree Configuration is Rapid Spanning Tree. If
not, select it and click "Apply".
7 Set up Switch-3: Enter the web GUI. Go to Menu > Advanced
Application > Spanning Tree Protocol > RSTP. Check the
"Active" box. Set the Bridge Priority = 32768. Active port 1, 2.
Click "Apply".
www.zyxel.com
100/215