Configure The Switch And Pc - ZyXEL Communications GS2210 series Handbook

2.3.3 Configure the Switch and PC

1 Set up DHCP Server in VLAN 10: Go to Menu > IP Application >
DHCP > DHCPv4 > Click Here > VLAN. Set up the VID (VLAN of
PC-1) and DHCP Status as Server. The Client IP Pool Starting
Address refers to the first IP Address the Switch will assign to
DHCP clients. The Size of Client IP Pool refers to the maximum
number of IP addresses the switch will provide. Set the
gateway as the IP of the Switch in VLAN 10 (192.168.10.1).
Click "Add".
Note:
In this example, the pool size is 10 and the starting IP address is 192.168.10.11.
Therefore, the IP range that the DHCP Server will assign is between
192.168.10.11 and 192.168.10.20.
www.zyxel.com
86/215