Caring For Your Transcend Auto And Components; Cleaning The Exterior - Somnetics Transcend Auto User Manual

Transcend Auto User Manual
Caring for your Transcend
components
Transcend Auto is a maintenance free device. This section presents the following topics:


Cleaning the exterior


Cleaning of accessories

Cleaning the filter media and filter frame

Cleaning for multiple users
Warning:

Unplug the Transcend Auto before cleaning.

Do not submerge the Transcend Auto or power supply in liquid.

Prevent water from entering any openings of the device.

Do not use harsh or abrasive cleaning agents to clean the device or any
components.

Do not attempt to sterilize the Transcend Auto.

Do not place cleaning materials, such as a cloth or liquid, into the device air inlet or
air outlet connector.
Cleaning the Exterior
Follow these instructions to clean the exterior of the Transcend Auto.
Unplug the power supply prior to cleaning and disconnect the device from power cords.
1.
Mix a solution of 5% mild liquid detergent in distilled water (1.6 fl oz liquid detergent
2.
per quart of distilled water). Mild detergent should contain biodegradable anionic
surfactants and no phosphate.
Submerge a lint-free cotton cloth into the detergent solution.
3.
Wring excess water from the cloth then wipe the exterior of the Transcend Auto device
4.
for approximately 20 seconds using a gentle, back and forth wiping motion from the
front to back of the device. Apply firm pressure and ensure contact with all accessible
contact surfaces to adequately remove soil buildup.
Rinse the cloth in clear water to remove residual cleaning solution.
5.
Wring excess water from the cloth then wipe the Transcend Auto using a gentle front
6.
to back wiping motion to remove any detergent solution remaining on its surface.
Wipe the device with a dry, lint-free cotton cloth until the device is fully dry.
7.
Auto and
Page 26