Power Connection Jack And Usb Port - Somnetics Transcend Auto User Manual

Transcend Auto User Manual Page 13

Power connection jack and USB port

The power jack accepts the barrel plug of
the output cable from a DC power source to
operate the Transcend Auto.
A variety of power sources may be used to
power the Transcend Auto. An AC to DC
converting power supply is provided with
your device and should be used when
powering the device by line (wall outlet)
power.
An optional mobile power adapter connects
to a DC power outlet, such as that found in
an Automobile, truck, RV, boat, or similar
vehicle.
Optional Transcend battery packs are also
available to power the Transcend Auto.
USB port
A mini-AB USB port is provided for direct
data exchange between the Transcend Auto
and a computer via a USB data cable. This USB port
interface allows the clinician to configure
the Transcend Auto for prescription
pressure, ramp settings and Auto settings
Power jack
and provides access to therapy compliance
information that can be viewed by the user
and emailed to the clinician.