Using The Transcend Mobile Power Adapter (Mpa1) - Somnetics Transcend Auto User Manual

Transcend Auto User Manual
Using the Transcend Mobile Power Adapter
(MPA1)
Transcend Auto may be powered with an optional Mobile Power Adapter. The Mobile Power
Adapter is supplied with two cables: one to connect the MPA1 to the Transcend Auto
device, and the other to connect the MPA1 to a mobile power receptacle.
Note Use only the Somnetics-supplied Transcend Mobile Power Adapter.
Connect both cables to the base of the Mobile Power Adapter.
1.
Insert the barrel connector of the MPA1 output cable to the power jack of the
2.
Transcend Auto.
Insert the plug connector into the mobile power receptacle (e.g. cigarette lighter
3.
outlet).
The Transcend Auto power-up LED flash sequence should initiate. Once the power-
4.
up LED flash sequence is complete the LED lights will turn off. This sequence
indicates that power is being supplied to the Transcend Auto and that it has
successfully entered Standby Mode.
Note Make certain that the cables are securely connected to the Mobile Power Adapter
and to the power jack on the back of the Transcend Auto. It may be necessary to
unplug the cables and reconnect to ensure a good connection.
Page 21