Replacing The Filter Media - Somnetics Transcend Auto User Manual

Transcend Auto User Manual

Replacing the Filter Media

The Transcend Auto Filter Media should be replaced every six months at minimum.
Remove the Filter Frame by gently pressing the button release at the back of the
1.
Filter Frame towards the front of the device. Then pull the filter frame away from
the device.
To replace the Filter Media remove the used filter and discard. Lay a new Filter in
2.
the channel on the base of the Transcend Auto device.
Reconnect the Filter Frame to the device by placing the front clip into place first.
3.
Once the front clip is in place snap the back clip into place. Make sure the Filter
Frame is completely connected before use.
1
3
Filter Frame
Filter Media
2
Page 25