Installing The Vl-Hdw-418 Heat Sink Fan; Figure 36. Installing The Heat Sink Fan - VersaLogic Blackbird VL-EPU4562 Hardware Reference Manual

Installing the VL-HDW-418 Heat Sink Fan

1. Position the fan assembly
Using the figure below as a guide, align the mounting holes of the heat sink fan with the

four holes in the passive heat sink. Position the fan so that its power cable can easily
reach its mating connector (J18).
2. Secure the fan to the heat sink
Affix the heat sink fan using four M3 pan head screws.

Using a torque screwdriver, tighten the screws to 4.0 inch-pounds.

3. Connect power to the fan
Connect the fan's power cable to J18 on the EPU-4562/4462.


Figure 36. Installing the Heat Sink Fan

VL-EPU-4562/4462 Reference Manual
Thermal Considerations
73