Figure 3. Typical Development Configuration - VersaLogic Blackbird VL-EPU4562 Hardware Reference Manual

Figure 3. Typical Development Configuration

1. Attach Cables and Peripherals
Attach a VGA monitor to either of the baseboard's Mini DisplayPort++ connectors using a

VL-CBR-2032.
Attach a SATA hard disk to the either of the baseboard's SATA connectors using a VL-

CBR-0701 or VL-CBR-0702 cable.
Attach a VL-CBR-4005B paddleboard to the baseboard's User I/O connector.

Connect a USB keyboard and USB mouse to one of the USB Type-A connectors on the VL-

CBR-4005B paddleboard.
Attach a USB CD-ROM drive to one of the USB Type-A connectors on the VL-CBR-4005B

paddleboard.
2. Connect Power Source
Plug the power adapter cable VL-CBR-0809 into the main power connector on the

baseboard. Attach the motherboard connector of the ATX power supply to the adapter.
Attach an ATX power cable to any 3.5-inch drive that is not already attached to the power

supply (hard drive or CD-ROM drive).
VL-EPU-4562/4462 Reference Manual
Configuration and Setup
14