Installing The Heat Sink Fan; Figure 21. Installing The Passive Heat Sink; Figure 22. Installing The Heat Sink Fan - VersaLogic VL-EPME-30ECP Hardware Reference Manual

Installing the Heat Sink Fan

Install the heat sink fan (VL-HDW-407) using these steps:
1. Position the fan assembly

Using Figure 22 as a guide, align the mounting holes of the heat sink fan with the four
holes in the passive heat sink. Position the fan so that its power cable is on the side
nearest the J24 CPU fan connector. The CPU fan connector is located between the two
Mini DisplayPort connectors (see Figure 6.)
2. Secure the fan to the heat sink

Affix the heat sink fan using four M3 pan head screws.

Using a torque screwdriver, tighten the screws to 4.0 inch-pounds.
3. Connect power to the fan

Connect the fan's power cable to the J24 CPU fan connector on the Bengal board.
Bengal (VL-EPMe-30) Reference Manual

Figure 21. Installing the Passive Heat Sink

Figure 22. Installing the Heat Sink Fan

Thermal Considerations
57