Installing the VL-HDW-417 Passive Heat Sink
1. Apply the Arctic Silver
Apply the thermal compound to the heat plate using the method described on the Arctic
Silver website -
2. Position the passive heat sink
Using the next figure as a guide, align the seven mounting holes of the heat sink with the
heat plate.
Orient the heat sink fins in the direction of the system airflow to maximize CPU cooling.
3. Secure the passive heat sink to the heat plate
Affix the passive heat sink to the heat plate using seven M2.5 pan head screws.
Using a torque screwdriver, tighten the screws to 4.0 inch-pounds.
Figure 35. Installing the Passive Heat Sink
VL-EPU-4562/4462 Reference Manual
*
Thermal Compound (VL-HDW-401)
http://www.arcticsilver.com/
Thermal Considerations
72