Honeywell Thor CV41 User Manual page 57

8. Tap the Properties button.
9. Select Validate server certificate.
10. Select a root certificate or load a root certificate of the authentication server on your
11. Tap OK to exit the Properties screen.
12. Tap OK again to save the Microsoft Security settings.
Enable WPA or WPA2 Personal (PSK) Security With Microsoft Security
Use the following procedure to enable WPA-PSK With Microsoft Security.
1. Make sure the communications and radio parameters on your computer are config-
2. Tap Start > Network Connections. The Network Connections screen appears.
3. Tap and hold onto the Wireless Network Connection icon until the pop-up screen
4. Tap the Wireless Networks tab.
5. Make sure your wireless network you are going to configure is selected and tap the
6. For Network Authentication, choose WPA-PSK or WPA2-PSK and select TKIP or
7. For Network Key, enter the pre-shared key or the passphrase.
8. For Confirm Network Key, enter the pre-shared key or the passphrase again.
9. Save your settings.
Configure 802.1x Security with Microsoft Security
Use the following procedure to configure 802.1x security with Microsoft security. Hon-
eywell recommends that you use WPA2-802.1x instead of 802.1x-WEP if possible.
1. Make sure the communications and radio parameters on your computer are config-
2. Tap Start > Network Connections. The Network Connections screen appears.
3. Tap and hold onto the Wireless Network Connection icon until the pop-up screen
4. Tap the Wireless Networks tab.
5. Make sure your wireless network you are configuring is selected and tap the
CV41 Vehicle Mount Computer (Windows Embedded Standard) User Guide
computer. For help, see
ured.
appears and select Properties.
Properties button.
AES. The Encryption type automatically defaults to AES.
The pre-shared key must be a value of 32 hex pairs preceded by 0x for a total of 66
characters. The value must match the key value on the authenticator. The passphrase
must be from 8 to 63 characters. After you enter a passphrase, the computer
internally converts it to a pre-shared key.
ured.
appears and select Properties.
Properties button.
Load a Certificate.
49