Honeywell Thor CV41 User Manual page 47

Device Settings Options
Screen
System Component Versions
Application Options
Intermec Browser
Intermec Terminal Emulation
Printer Options
Printer (if connected through
Bluetooth)
Note: The Printer menu displays settings for Bluetooth connected printers. The settings that
appear in the menu are dependent on the printer that is paired with the device. The printer
needs to be paired using the Bluetooth Printing application.
RFID Options
RFID Service
Virtual Wedge Options
Enable Virtual Wedge
Virtual Wedge Method
CV41 Vehicle Mount Computer (Windows Embedded Standard) User Guide
Parameters You Can Configure
• Brightness settings
• Screen Blanking On Motion
settings
System component versions (read-
only)
Parameters You Can Configure
• Administration settings
• Menu options
• Toolbar options
• Key options
• Printer settings
• Function key mapping
• Program name (read-only)
• Program version (read-only)
• Enable SIP
• No Lockdown settings
• No Auto-Start
• OOR Monitor settings
• Chk In License settings
• Trusted App settings
• Scan Control settings
• Menu options
• Toolbar options
• Debug filters
• UDP+ options
• Sessions 1 - 4
Parameters You Can Configure
Printer settings (Information, memory,
printer definitions, power, Bluetooth
communications, and so on)
Parameters You Can Configure
Enable RFID service
Parameters You Can Configure
Enable virtual wedge
Set the virtual wedge method (adapt to
application, character mode, and block
mode)
39