CV41 Startup Behavior Descriptions
Startup
Behavior
Auto-On
Select a Startup Behavior
By default the computer startup behavior is set to standard. If you intend to startup your
computer using ignition control or auto-on, make sure you wire the ignition input wire
according to the CV41 Vehicle Mounting Kit Reference Guide.
Caution: You must wire the ignition input wire before enabling ignition
1. Tap Start > Control Panel > AutoOn. The Ignition and Auto-On Properties screen
2. Select the startup behavior.
3. Tap OK.
About the LEDs
The LEDs on the computer indicates the state of the computer.
CV41 Vehicle Mount Computer (Windows Embedded Standard) User Guide
Description
The computer is turned on when power is applied:
•
power switch on the smart dock is on.
•
the ignition input wire is connected.
control or auto-on
appears
11