Autolaunch The Oneclick Internet Application; Connect To Wwan Automatically On Startup; Reconnect To Wwan Automatically; About Data Roaming - Honeywell Thor CV41 User Manual

AutoLaunch the OneClick Internet Application

When you enable AutoLaunch, the OneClick Inernet application opens when the com-
puter starts up. Enable AutoLaunch to easily access the OneClick Internet application
or view your current WWAN settings.
1. Tap Start > All Programs > OneClick Internet > OneClick Internet. The Oneclick
2. Tap the Settings button and select the General tab.
3. Select the AutoLaunch checkbox to enable AutoLaunch.

Connect to WWAN Automatically On Startup

By default, you must manually enable WWAN connectivity. Use this section to learn how
to automatically enable WWAN connectivity on startup.
1. Tap Start > All Programs > OneClick Internet > OneClick Internet. The Oneclick
2. Tap the Settings button and select the General tab.
3. Select the Connect Automatically checkbox to automatically enable WWAN

Reconnect to WWAN Automatically

If for any reason you are disconnected from WWAN, you must manually re-enable
WWAN connectivity. Use this section to learn how to reconnect to WWAN automatically.
1. Tap Start > All Programs > OneClick Internet > OneClick Internet. The Oneclick
2. Tap the Settings button and select the General tab.
3. Select the Reconnect Automatically checkbox to automatically reconnect to

About Data Roaming

Data roaming leaves your WWAN connection on even when you are not in an area cov-
ered by your carrier's network. If you want to avoid any unwanted roaming charges, turn
off data roaming.

Enable or Disable Data Roaming

Enable data roaming to leave your WWAN connection on in areas not covered by your
carrier's network or disable it to turn off your WWAN connection.
CV41 Vehicle Mount Computer (Windows Embedded Standard) User Guide
Internet application opens.
Internet application opens.
connectivity on startup.
Internet application opens.
WWAN.
63