Configuring The Svi Ii Ap For Remote Position Sensing - GE SVI II AP-2 Quick Start Manual

Installation and Set Up

Configuring the SVI II AP for Remote Position Sensing

After the Remote Position Sensor is installed and cabled to the SVI II AP, the SVI
II AP needs to be configured so that valve position is sensed by Remote Position
Sensor. A digital communication software tool is provided on the CD shipped with
the SVI II AP for this purpose. First you must install the software tool, SMARTS
Assistant, from the CD and then using the tool, configure the SVI II AP. You may
also download SMARTS Assistant from, www.masoneilan.com, downloads.
To install SMARTS Assistant (see Figure 21):
1. From the CD select and click on Install Software.
The available software tools appear.
2. Click Install SMARTS Assistant ..... The program automatically installs.
Selecting Install Software
Configuring the SVI II AP Using SMARTS Assistant
To configure the SVI II AP:
1. Start SMARTS Assistant Standard by clicking the desktop icon or by selecting
the program through the Start menu. The Connection screen appears.
2. Click Connect as shown in Figure 22.
SMARTS Assistant searches for the SVI II AP, to which the Remote Position
Sensor is connected.
3. Connect the device to the software and display device information as shown in
Figure 22.
4. Select Options tab and the Options screen appears as shown in Figure 22.
Figure 21 Installing SMARTS Assistant from CD
Installing SMARTS Assistant
37
Configuring the SVI II AP for