GE SVI II AP-2 Quick Start Manual page 75

Specifications and
3 Model Number Description of SVI-II AP
SVI2-abcdefgh Not all combinations are available.
SVI2- a
0
ES -Easy
1 Smart (1)
SD - Standard
2 Diagnostics
Remote Sensing
AD - Advanced
3 Diagnostics
Remote Sensing
OD - On-Line
4 Diagnostics
Remote Sensing
PC - Process
5 Controller
Remote Sensing
6
Style
(1) Not available in a flameproof housing.
(2) The SVI-II AP may be up-graded in the field by the addition of a display and
buttons.
(3) Not available on SVI2-0
(4) Available only on SVI2-0
4 FLAMEPROOF and DUST IGNITION PROOF REQUIREMENTS
4.1 General
4.2 Cable Glands
4.3 Natural gas
b c
Standard
Single Acting
Flow
Double High
Acting Capacity
Pneumatics Capacity
The 1/2 inch NPT fittings must enter the housing at least five full turns.
The cover flange must be clean and free of corrosion products.
Certified cable glands are required based on the hazardous area the
device is installed in. That is, the particular cable gland used must
have the same certification as the tick-box checked off on the label
(see Section 6).
Use of a pressurized gas which is ignitable in the presence of air (for
example natural gas) is not allowed as the SVI II AP supply pressure
in a flameproof (protection type "d") installation.
d e
No Display
No Buttons
Industrial
Display
Buttons
Industrial
(2)
Plug-in
No Display
Electronics
No Buttons
Module
Offshore
(MNCB)
Display
Buttons
Offshore (2)
Display Electronics
75
Hazardous Location Installation
f g
Hart
None
4 to 20 MADC
Retransmit
and Digital
Out (Note
3)
Retransmit
(Note 4)
Communication Option
ES-699 Rev U
Page 3 of 17
h
Generic ( National
Labeling as
Required)
FM, CSA,ATEX, IEC
(XP, DIP, IS, NI)
FM, CSA ATEX (IS,
NI)
ATEX (IS, NI)
FM, CSA,ATEX,IEC
(XP, DIP, IS, NI)
Nuclear
Hazardous
Certification