Model Number Description Of Svi Ff Positioner - GE Masoneilan SVI FF Quick Starter Manual

3

Model Number Description of SVI FF positioner

SVI-abcdefgh Not all combinations are available.
SVI-
Style (2,3,4)
1
Standard
2
Diagnostics
Advanced
3
Diagnostics
4
5
6
7
MODEL CODES COVERED BY THIS DOCUMENT:
SVI-abcdefgh, where "a" thru "h" can take on the following values:
a= 1..X. Indicates internal firmware style.
b= 1, 2. Indicates pneumatic train type.
c= 1, 2. Indicates pneumatic flow.
d= 1, 2, 3, 4. Indicates display type and housing material.
e= F, P. Indicates communication protocol.
f= 1..X. Indicates options turned on by firmware.
g= 2. Indicates agency approvals.
h= 1. Indicates North American Zone Approvals
2...X. Indicates additional region specific approvals.
Copyright 2016. This document and all information herein is the property of Dresser Inc.
© 2017 General Electric Company. All rights reserved
B
C
A Pneumatic
Pneumatics
Train
(1,2)
(1,2)
Single Standard
Acting Flow
Double High
Acting Capacity
(NOT RELEVANT TO PROTECTION TYPES)
(1 = SINGLE ACTING, 2 = DOUBLE ACTING)
(1 = STANDARD FLOW, 2 = HIGH FLOW)
(1 = NO DISPLAY; NO BUTTONS; ALUMINUM)
(2 = DISPLAY; BUTTONS; ALUMINUM)
(3 = NO DISPLAY; NO BUTTONS; STAINLESS STEEL)
(4 = DISPLAY; BUTTONS; STAINLESS STEEL)
(F = FOUNDATION FIELDBUS. P = PROFIBUS)
(NOT RELEVANT TO PROTECTION TYPES)
(UNI-LABEL; ATEX, IEC, FM, FMc)
D
Display / E
housing Communications
Material (F,P)
(1,2,3,4)
No Display F= Foundation
No Buttons Fieldbus
Aluminum
Display
P=Profibus
Buttons
Aluminum
No Display
No Buttons
Stainless
Steel
Display
Buttons
Stainless
Steel
.
Masoneilan SVI FF Positioner Quick Start Guide =| 21
GE Oil & Gas
G
F
Agency Other Agency
Options
Approvals Approvals
(1)
(2) (1,2,3,4,5,6)
American
None
(FM, FMc)
Unilabeled
(ATEX,
IEC,FMc,
FM)
INMETRO
ES-776 Rev L
Page 5 of 14
H
North
Zone
GOST
KOSHA
NEPSI
JIS
CCOE