Settings Menu - Events - ABB CMS-700 User Manual

Circuit monitoring system

Hide thumbs Also See for CMS-700:

Table of Contents

CMS-700 SYSTEM CIRCUIT MONITORING SYSTEM (CMS)

—

WEB UI - Settings Menu

—

Settings Menu - Events

This page allows to set events. If an event occurs, it is shown in the historical events menu. An event can

occur after exceeding the selected threshold values (cross-up) or after measuring values lower than the

selected threshold values (cross-down) for a determined period (time delay). The email report is sent

after 1 minute from the first event occurance and consists of all events that occured in this period. The

next report can only be sent after at least 30 minutes since the first event occurance and only in case

event conditions are still ongoing.

When adding a new event, please set the following:

Mains/Branches

Owner

Value

Type

Threshold

Time delay

Select whether the event shall be created for mains or branches

Select main line or the branch name. For branches it is possible to create the

same event for several branches by selecting "Add many" option.

It identifies the quantity to which the event is linked

Type of alarm: Cross-up, Cross-down or No event

Threshold of selected value

Define for how long the event criteria should be fulfilled in order

to consider the occurrence as an event

If the box is selected, an e-mail will be sent.

The email address has to be defined in "Settings – Email, FTP".

Table of Contents