ABB CMS-700 User Manual page 39

Circuit monitoring system

Hide thumbs Also See for CMS-700:

Table of Contents

CMS-700 SYSTEM CIRCUIT MONITORING SYSTEM (CMS)

—

WEB UI - Settings Menu

—

Settings Menu - Communication / SNMP

Version 3: To enable version 3 mark the v.3 checkbox, enter port number, password, user name, and

engine ID. The same as for versions v.1/2c port number must be 161 or greater than 1024. The password

for version 3 must have at least 8 signs, while the engine ID must have at least 12 characters in

hexadecimal format. To access data using SNMPv3 the authenticated and encrypted request must be

sent. The authentication is performed by username and password. For the authentication the MD5

protocol is used. Messages are additionally encrypted with the DES algorithm.

Please note that versions 1/2c and 3 can work simultaneously.

Table of Contents