Diagnostic; Events Log; Alarms - ABB SCU200 User Manual

SCU200 INSITE ENERGY MANAGEMENT SYSTEM 61

6.6.Diagnostic

6.6.1.Events log

Here it is possible to show all the events that occurred in the paginated table. Rows can be sorted and/or
filtered by clicking headers and selecting desired value from drop-down lists.
Events must previously be set in the "Diagnostic -> Configuration" page.
It is possible to visualize a table according to user-defined start and end date/time.

6.6.2.Alarms

Here it is possible to show all the alarms that occurred in the paginated table. Rows can be sorted and/or
filtered by clicking headers and selecting desired value from drop-down lists.
Events must previously be set in the "Diagnostic -> Configuration" page.
It is possible to visualize a table according to user-defined start and end date/time.
It is possible to mark alarms as acknowledged.
Alarms are stored only in the device's temporary memory, each time device is restarted this list is cleared.