Table of Contents
Advertisement
CMS-700 SYSTEM CIRCUIT MONITORING SYSTEM (CMS)
—
Components of CMS system
—
Control Unit
LEDs
Reset button
Terminals L1, L2, L3, N
• Wire gauge max 2.5 mm
• Voltage 80-277 VAC 50/60 Hz
—
CMS Sensor
Pushbutton
Sensor LED Status:
ON
Sensor is online and in measurement mode. There is a feature in the configuration
to switch off the LED after a specified time
OFF
Sensor is not connected to CMS-Bus or is switched off in the configuration
Flashing slowly
Sensor is not assigned
Flashing fast
Sensor in assign process or in "setting/branches" mode. This sensor is the sensor
corresponding to the yellow-marked row on the screen for webserver settings.
2
Solid-core sensor
Open-core sensor
15
RJ45-socket for LAN
connection
CMS-Bus up to 96 sensors
Terminal RS-485
Modbus (RTU)
Terminal Current Transformer
for secondary winding,
nominal 5 A, max 6 A
Opening for the electrical
conductor
CMS-Bus
LED
Advertisement
Table of Contents
