Mounting Of Cable Tie Sensors; Connection - ABB CMS-700 User Manual

22 CMS-700 SYSTEM CIRCUIT MONITORING SYSTEM (CMS)
—
Installation Guide
—

Mounting of cable tie sensors

• The cable should not exert force on the sensor, otherwise measuring errors may occur
—

Connection

Finally, connect the CMS- Sensors to the control unit.
Plug in the cable, check the correct connection direction. (Picture to the right)
Attention: When plugging in the CMS flat cable on the sensors,
check the correct connection direction.
1. Insert the cable into the installed device
through the opening on the sensor.
2. Fix the cable with a cable tie.