Lan Connection Via Router; Accessing The Web Ui Via Hostname; Direct Lan Connection - ABB CMS-700 User Manual

Circuit monitoring system

Hide thumbs Also See for CMS-700:

Table of Contents

CMS-700 SYSTEM CIRCUIT MONITORING SYSTEM (CMS)

—

Initial Commissioning

—

LAN connection via Router

The CMS-700 control unit is connected to the router using an RJ45 cable (network).

Host name: CMS-700 Port: 8000

To be added to the IP address to define the port number (e.g. 192.168.1.200:8000) to access

your web browser. Defining the port number is important because without a port number access is not

possible.

In case of DHCP, the system administrator can read the IP address assigned to the

CMS-700 device by DHCP on the router.

—

For network connection, an access with static address may be necessary in the first step.

IP Address: 192.168.1.200:8000 / Subnet Mask: 255.255.255.0

To increase system security, CMS-700 will not respond to an ICMP echo request (ping).

Therefore, it is invisible to ICMP-based network scanners.

RJ45 socket for

LAN connection

Table of Contents