Attach suitable flexible hoses to the inlet and outlet connections.
e.g.,
Suction -
Outlet - Ø38 - 50 I.D. [20 bar working pressure]
Ensure adequate air space around the Pump for maintenance and electric motor cooling requirements.
Check that the oil plug on top of Gearbox has been replaced with the correct venting plug.
The vent plug is supplied in a bag attached to the gearbox.
Ensure the gearbox is filled with oil.
(The gearbox is filled with the correct amount of oil at the factory)
77-3229 R4.1
INSTALLATION
Ø50 I.D. [-1 to 10 bar working pressure]
8/36
EN
www.carlisleft.com