Profibus-Dp Network - Mitsubishi Electric MELSEC FX2N-32DP-IF Hardware Manual

FX2N-32DP-IF Profibus-DP Interface Unit
2.4

Profibus-DP Network

To connect the 32DP-IF to a Profibus-DP network should be used only the Profibus connectors
and shielded twisted-pair cable complying with EN50170.
Please use terminating resistors and Profibus connectors as shown in the DP-master manual
and Profibus connector manual.
The 32DP-IF does not have a terminating resistance built-in.
Note: Noise Prevention
For noise prevention please attach at least 50mm (1.97") of the shielded twisted-pair cable
along the grounding plate to which the ground terminal is connected.
Mounting and Wiring 2
2-14