Connected Monitoring Tools - Mitsubishi Electric MELSEC FX2N-32DP-IF Hardware Manual

FX2N-32DP-IF Profibus-DP Interface Unit
1.3.1

Connected Monitoring Tools

An FX-20P-E or personal computer can be used to monitor the 32DP-IF and the data
exchanged with the Profibus. For operating instructions of the FX-20P-E or personal computer,
refer to their respective operation manuals. For device numbers and explanation, refer to the
FX -32DP-IF User's Manual.
2N
Connecting cable is same as FX
Table 1.2: Connected Programming Tools
Monitoring Tools
FX-20P-E
Personal Computer
(MELSEC MEDOC PLUS)
Note;
For monitoring the 32DP-IF with a personal computer the PLC setting must be adjusted as
for the FX series PLC type.
MPU.
2N
Device monitor
Description
Introduction 1
1-6