Table of Contents
Advertisement
Chapter 2 Useful Features
5.
RAID System Configuration
5.1
Off-line Utility and Universal RAID Utility
The points to be noted when using Universal RAID Utility together with Off-line Utility are described below.
The name of Off-line Utility depends on Boot Mode. In Legacy Mode, Ctrl-R is used. In UEFI Mode, HII is used.
(1)
Terms
Some terms are different between Off-line Utility and Universal RAID Utility. When using Universal RAID Utility
together with Off-line Utility, replace the terms as shown in the table below:
Terms of Off-line Utility
Controller
Virtual Drive
Drive Group
Drive
(2)
Numbering
Numbers indicating RAID Controller configuration differ between Off-line Utility and Universal RAID Utility as
shown in the table below.
Refer to "Universal RAID Utility User's Guide" for details.
Controller (RAID Controller)
Virtual Drive (Logical Drive)
Drive Group (Disk Array)
Drive (Physical Device)
118
RAID Controller
Logical Drive
Disk Array
Physical Device
raidcmd is a command provided by Universal RAID Utility. For details, refer to
Tips
"Universal RAID Utility User's Guide".
Item
Starts from 0
Starts from 0
Starts from 0
Starts from 0
Express5800/E120f-M Maintenance Guide
Terms of Universal RAID Utility
RAID Viewer
raidcmd
RAID Controller
Logical Drive
Disk Array
Physical Device
Numbering
Off-line Utility
Universal RAID Utility
Starts from 1
Starts from 1
Starts from 1
To be assigned based
on an enclosure that
contains the physical
device and its slot
number.
5. RAID System Configuration
Advertisement
Table of Contents
