Table of Contents
Advertisement
Chapter 2 Useful Features
(6)
USB Configuration submenu
From the Advanced menu, select USB Configuration and then press the <Enter> key to display the menu
screen shown below.
For details about the options, see the table below.
Device Reset Timeout
Controller Timeout
XHCI Mode
XHCI Hand-off
74
Option
10 sec
[20 sec]
30 sec
40 sec
1 sec
5 sec
10 sec
[20 sec]
Smart Auto
[Auto]
Enabled
Disabled
Disabled
[Enabled]
Express5800/E120f-M Maintenance Guide
Parameter
Specify the timeout period when Start Unit
command is issued to USB mass storage
device.
Specify the timeout period when Control, Bulk,
and Interrupt Transfer commands are issued
to USB Controller.
Specify the operation mode of USB3.0
controller.
Smart Auto: Takes over the USB3.0 settings
at POST according to support status of OS.
Auto: Enables USB3.0 after the OS that
supports USB3.0 is started.
Enabled: Enables USB3.0.
Disabled: Disables USB3.0.
Enable or disable XHCI Hand-off feature.
1. System BIOS
Descriptions
[
]: Factory setting
Advertisement
Table of Contents
