Recharge Receiver; Start Sensor Session Without; Sensor Code - Dexcom G6 Instructions For Use Manual

A.9 Recharge Receiver
Issue
Receiver charge light is on or
Receiver will not turn on
Receiver needs to be charged
A.10 Start Sensor Session Without Sensor Code
Do you want to start a sensor session now, but do not have the sensor code? The
sensor code is on the applicator adhesive backing. Use only the sensor code from
the applicator you insert; do not use other codes. The right sensor code makes the
G6 work without prompting you to calibrate every day.
But even if you do not have a sensor code, you can still use the sensor. Throughout
your sensor session, you will be prompted to calibrate daily. (See Calibration Prompt
in section A.6 Common Alerts.)
Follow the prompts for Set Up Without Sensor Code.
Dexcom G6 System • Using Your G6
®
Appendix A: Troubleshooting
Solution
• Charge receiver using electrical outlet, not
computer/laptop
• Full charge may take up to 3 hours
59 59