Table of Contents
Advertisement
After running the Multiprocessor Upgrade Option program, you can use the
following procedure to install a second microprocessor:
1. Read the instructions that come with the new microprocessor.
2. Remove the cover. See "Removing the cover and front bezel" on
page 57.
3. If your computer has an air baffle, remove it. See "Removing the air
baffle" on page 59.
4. See the system board label inside your computer for the location of the
terminator and second microprocessor socket (second CPU).
5. Loosen the two screws holding the terminator card in the secondary
microprocessor socket (see "Identifying parts on the system board" on
page 60) and remove the terminator card from the second
microprocessor socket.
6. Remove the microprocessor from its static-protective package and insert
it into the guides. Push the microprocessor into the socket until it is
properly seated.
7. Tighten the two screws.
Chapter 5. Installing options
79
Advertisement
Table of Contents
Troubleshooting
