Starting The Cd; Using The Software Selections Program - IBM IntelliStation Z Pro Type 6866 User Manual

Starting the CD

To use the Software Selections CD, insert the CD into your CD-ROM drive.
The Software Selections program starts automatically.
If the auto-run feature is disabled in your computer:
1. Click the Windows Start button; then click Run.
2. Type e:\swselect.exe where e is the CD-ROM drive letter.
3. Press Enter. The Software Selections menu appears.
4. Select the desired option; then follow the instructions on the screen.
or
To use the Software Selections CD with Access IBM to install software:
1. Insert the Software Selections CD into your CD-ROM drive.
2. From the Access IBM menu, click Customize.
3. From the Customize menu, click Install software. A Software
Selections for IBM dialog box appears.
4. Follow the instructions on the screen.
After a program is installed, you can access it through the Programs choice
on the Windows Start menu. For most programs, support documentation is
built into the online Help system; for some, online documentation is also
provided.

Using the Software Selections program

A Software Selections program is provided on your IBM Software Selections
CD.
To use the Software Selections program:
1. In the Software Selections menu, click the check box next to each
program you want to install.
2. After selecting the software, click Install. A window opens showing
the software programs that will be installed. Click OK to continue
with the installation process or click Cancel to reset your options.
3. To complete a task, make the applicable selections and follow the
instructions on the screen.
132
IntelliStation Z Pro User Guide