IBM IntelliStation Z Pro Type 6866 User Manual page 82

4. Push the tab on the back of the memory card inward and pull the
memory card out of the chassis.
5. At both ends of the RIMM connector on the memory card, push
outward on the retaining clips until the module is loosened. Lift the
RIMM or C-RIMM out of the connector.
Note: Be careful not to push too hard on the retaining clips, because
the RIMM or C-RIMM might eject too quickly.
6. Store the RIMM or C-RIMM in a static-protective package. Do not
discard or lose this part. It might be needed later if you change your
memory configuration.
66
IntelliStation Z Pro User Guide