Option Problems - IBM IntelliStation Z Pro Type 6866 User Manual

Option problems

Option problems
An IBM option that
was just installed does
not work.
Action
Verify that:
1. The option is designed for your computer.
2. You followed the installation instructions
supplied with the option and in Chapter 5,
"Installing options" on page 55.
3. All option files (if required) are installed
correctly. Refer to the documentation that comes
with the option for information about installing
option files.
4. You have not loosened any other installed
options or cables.
5. If the option is an adapter, you have provided
enough hardware resources for the adapter to
function correctly. See the documentation
supplied with the adapter (as well as the
documentation for any other installed adapters)
to determine the resources required for each
adapter.
6. You updated the configuration information in
the Configuration/Setup Utility, if necessary,
and have no conflicts. For more information, see
Chapter 4, "Using the Configuration/Setup
Utility program" on page 37.)
If the problem persists, run the diagnostic programs.
(See "IBM Enhanced Diagnostics" on page 109 for
information about diagnostic programs provided
with your computer.)
If you cannot correct the problem, have the option
and computer serviced.
Chapter 6. Troubleshooting
105