IBM IntelliStation Z Pro Type 6866 User Manual page 158

5. Attach the cable-management arm to the right rear of the rack
enclosure.
a. Align the holes on the cable-management arm mounting panel
with the cage nuts on the rear mounting rail.
b. From the rear of the rack enclosure, insert a long screw through
the holes in the cable-management arm mounting panel and cage
nut; then, tighten the screws.
Notes:
1) You can choose to wait to attach the cable-management arm to
the rack until after you have attached the other end of the
cable-management arm to the computer.
2) To facilitate alignment of the cable-management arm, be sure
to insert the screws through the first and fourth holes, as
shown.
142
IntelliStation Z Pro User Guide