IBM IntelliStation Z Pro Type 6866 User Manual page 108

Code Description
166 Boot block check sum error
167 Clock not updating
168 Alert on LAN is not working
correctly.
175 System board error
176 The system cover has been
removed.
177 An inventory violation
occurred, such as a hardware
component was removed. This
error message is part of the
Asset ID feature of the
computer.
184 The asset control antenna has
not been detected.
186 A system board or hardware
security error occurred.
187 The administrator password
and boot sequences have been
cleared.
190 The computer chassis-intrusion
detector was cleared. (This is
an informational message. No
action is required.)
92
IntelliStation Z Pro User Guide
Action
1. Go to "Recovering from a
POST/BIOS update
failure" on page 115 and
follow the instructions to
run the POST/BIOS
recovery procedure.
2. If the problem persists,
have the computer
serviced.
Update the BIOS. See
"Updating system programs"
on page 26.
1. Go to Chapter 4, "Using
the Configuration/Setup
Utility program" on
page 37 to make sure that
Alert on LAN is enabled.
2. If Alert on LAN is enabled
and the problem persists,
have the computer
serviced.
Have the computer serviced.
Type the administrator
password. If the problem
persists, have the computer
serviced.
Type the administrator
password. If the problem
persists, have the computer
serviced.
Have the computer serviced.
Have the computer serviced.
Go to Chapter 4, "Using the
Configuration/Setup Utility
program" on page 37 for
instructions on setting an
administrator password and
the startup sequences.