Maintenance; Empty The Dust Cup; Clean The Filters - Shark NV500REF Owner's Manual

MAINTENANCE

EMPTY THE DUST CUP

1 Pull up on the dust cup release latch and lift the dustcup off the pod.
2 Holding the dust cup over a garbage bag or can, press the bottom empty release latch.
3
Press the top dust cup release latch to access the dust screen and remove built-up debris as required. With the dust screen
removed, turn the dust cup over and empty the upper chamber by holding it by the recessed handle underneath the dust cup.

CLEAN THE FILTERS

See cleaning schedule on page 2
4
With the dust cup removed, remove and rinse the foam and felt filters every 3 months. Let air dry completely before replacing.
Hand wash only. Tap loose dirt off filters between washes as needed.
5
Once a year open the filter grill and remove and rinse the HEPA filter. Let air dry completely before replacing. Hand wash
only.
1
2
8 0 0 . 7 9 8 . 7 3 9 8
3
XFH500
HEPA
5
4
Foam
XFF500
Felt
9