Upright Cleaning; Above Floor Cleaning - Shark NV500REF Owner's Manual

UPRIGHT CLEANING

1 Press POWER to clean bare floor surfaces, area rugs or areas above-floor. The brushroll will not spin in this mode.
2
Press POWER and BRUSHROLL to clean carpets. The brushroll indicator lights will illuminate GREEN. If there is a jam, the
indicator light on floor nozzle will illuminate RED. Refer to MAINTENANCE section (P9) for instructions on removing blockages.
3
Place your left foot gently on the floor nozzle and tilt the handle back to start cleaning. Note: The brushroll will only spin once
the vacuum is reclined back.

ABOVE FLOOR CLEANING

4 To clean with hose, press the WAND or HANDLE release button (depending on the amount of reach required) then lift
handle up.
5 Insert wand or handle directly into desired tool.
6 Pivot back to release tool from accessory clip.
POWER
Bare floor or
wand cleaning
1
OR
2
POWER +
BRUSHROLL
Carpet cleaning
3
8 0 0 . 7 9 8 . 7 3 9 8
OR
4
6
4
5
5