Connection - Siemens SIMATIC ET 200SP Manual

Properties
● BaseUnit suitable for all fail-safe and non-fail-safe SIMATIC ET 200SP High Feature
motor starters
● No new potential groups are opened with this BaseUnit.
● The potential group (24 V DC) is looped through.
● The infeed group (500 V AC) is looped through.
● Connection method using push-in terminals
● The touch protection cover for the infeed bus is not included in the scope of delivery.
● The fail-safe input F-DI of the fail-safe motor starter is connected to the power bus.
5.5.2

Connection

Pin assignment
Terminal
T1, T2, T3, PE
BaseUnits (6ES7193-6BP.../3RK1908-0AP00...)
Manual, 02/2018, A5E03727049-AJ
Pin assignment for BaseUnit without infeed
Motor feeder
BaseUnits for motor starters
5.5 BU30-MS4 - BaseUnit without infeed
Descriptions
101