Connecting - Siemens SIMATIC ET 200SP Manual

Potential distributor modules
6.6 PotDis-TB
6.6.2

Connecting

Pin assignment
Terminal block
PotDis-TB-P1-R
PotDis-TB-P2-B
PotDis-TB-n.c.-G n c.
PotDis-TB-BR-W
Block diagram
①
②
③
④
Figure 6-10
132
Pin assignment for PotDis-TB terminal block
Terminal
P1
P2
(not connected)
BR (bridged)
PotDis-TB-P1-R
PotDis-TB-P2-B
PotDis-TB-n.c.-G
PotDis-TB-BR-W
PotDis-TB block diagram
Rated supply voltage up to 48 V DC with max. 10 A (18 red
terminals)
Ground (18 blue terminals)
Terminals can be used freely up to 230 V AC with max. 10 A
(18 gray terminals).
If you connect voltage, it must belong to the same potential
group.
Terminals for protective conductor connection or voltage bus
freely usable up to 230 V AC with max. 10 A (18 white termi-
nals)
BaseUnits (6ES7193-6BP.../3RK1908-0AP00...)
Explanation
Manual, 02/2018, A5E03727049-AJ