Siemens SIMATIC ET 200SP Manual page 17

Product overview
Properties of the BaseUnits for motor starters
The following table lists the properties of the individual BaseUnits for motor starters:
BaseUnit
BU30-MS1
BU30-MS2
BU30-MS3
BU30-MS4
BU30-MS5
BU30-MS6
16
Properties
Push-in terminals for opening a new potential group (24 V DC).
•
Feeding in of supply voltage up to a maximum supply current of 7 A
•
DC.
Opening a new supply voltage potential group (500 V AC)
•
Feeding in of supply voltage up to a maximum supply current of
•
32 A AC.
Further conduction of the potential group (24 V DC)
•
Push-in terminals for opening a new supply voltage potential group
•
(500 V AC)
Infeed of supply voltage up to a maximum supply current up to 32 A
•
AC.
Push-in terminals for opening a new potential group (24 V DC).
•
Infeed of the supply voltage L+ up to an infeed current of 7 A DC
•
Further conduction of the supply voltage potential group (500 V AC)
•
Further conduction of the supply voltage potential group (500 V AC)
•
Further conduction of the potential group (24 V DC)
•
Further conduction of the potential group (24 V DC)
•
Push-in terminals for opening a new supply voltage potential group
•
(500 V AC)
Infeed of supply voltage up to a maximum supply current of 32 A AC
•
A fail-safe digital input
•
Further conduction of the potential group (24 V DC)
•
Further conduction of the supply voltage potential group (500 V AC)
•
Push-In terminals
•
A fail-safe digital input
•
BaseUnits (6ES7193-6BP.../3RK1908-0AP00...)
Manual, 02/2018, A5E03727049-AJ