5.5.10 Tag Name Setup; Figure 5-15 Tag Name Setup Menu - Emerson Bettis 500 Installation And Operation Manual

Section 5: Customizing Actuator Settings
February 2018

5.5.10 Tag Name Setup

Figure 5-15 Tag Name Setup Menu
Go to
Figure 5-13
BACK
TAG NAME
SETUP?
NO
OR
NEXT
YES
PASSCODE
SETUP?
NEXT
OR
BACK
68
BATTERY
ENABLE?
NEXT
1. At the "TAG NAME SETUP?" prompt, answer, "YES."
2. Use the control knob (NO) to increment the data entry selection for
each character.
NOTE:
The tag name consists of a maximum of sixteen characters. Spaces and dashes are
included in the sequence of "space," "-," "0-9," "A-Z."
3. At the "ACCEPT?" prompt, answer, "YES" for each character.
4. Use the selector knob (BACK) to make changes to the previous characters
in the tag name while entering the data.
See Figure 5-15.
TAG NAME SETUP MENU
Figure 5-15
ACCEPT?
YES YES
x
NO
Increment
characters: sp, -,
0-9, A-Z,
PASSCODE SETUP MENU
Figure 5-16
ACCEPT
Passcode
YES
YES
Character 1:0
NO
Increment
character: 0-9, A-Z,
BATTERY ENABLE MENU
Figure 5-17
Battery
YES
Enable?
Installation and Operation Manual
Menu Setup
BACK
Continue this process
for 16 characters
ACCEPT?
YES
xx
NO
Increment
characters: sp, -,
0-9, A-Z,
BACK
NEXT
ACCEPT ACCEPT
Passcode Passcode
YES
Character 2:00 Character 3:000
NO NO
Increment Increment
character: 0-9, A-Z, character: 0-9, A-Z,
E2K-405-0218 Rev. 2
NEXT
ACCEPT?
YES
xx
NO
Increment
characters: sp, -,
0-9, A-Z,
YES
Customizing Actuator Settings