Valve Control Setup; Figure 5-5 Passcode Entry - Emerson Bettis 500 Installation And Operation Manual

Section 5: Customizing Actuator Settings
February 2018
Figure 5-5 Passcode Entry
Go to
Figure 5-3
BACK
CHANGE
SETTINGS?
YES
NO
NO
Go to Next Display
See Figure 5-4
5.5.2
48

Figure 5-5 Passcode Entry

Is Passcode
Accept
Passcode
'000'?
YES
Character 1:0
NO
NO
Is Passcode
Increment Character
'RPC'?
0-9, A-Z
YES
RESET
PASSCODE?
YES
NO

Valve Control Setup

1. At the "VALVE CONTROL SETUP?" prompt answer "YES."
2. Use the selector knob (NEXT/BACK) to scan the settings until the desired
setting is reached. Place the control knob in the NO position to increment
through each setting's associated choices. Answer "YES" to accept the
desired choice. See Figure 5-6.
See Section 4.5, Remote/Auto Control Operation, for a description of each
control mode.
Installation and Operation Manual
BACK NEXT
Accept
Passcode
YES YES
Character 2:00 Character 3:000
NO
Increment Character Increment Character
0-9, A-Z
Passcode Reset To
'000'
E2K-405-0218 Rev. 2
Is Passcode
Accept
Passcode
Correct?
YES
NO
YES
0-9, A-Z
Go to Next Display
See Figure 5-4
Customizing Actuator Settings
NO