Date - Mercedes-Benz COMAND Operating Instructions Manual

Additional Display
Select
X
A menu appears.
To select the desired display element: turn and press the controller.
X
The # dot indicates the current setting.
Switching the display on/off
Press the Ø button.
X
or
Vehicle
Press in the main function bar.
X
The vehicle menu is displayed.
Display Off: slide 6, turn and
To select
X
press the controller to confirm.
The display goes out.
To switch the display on again: press the
X
controller.
Time settings
General information
COMAND can automatically set the time and

date.

The following navigation system functions
require the time, time zone and summer/
standard time to be set correctly in order to
work properly:
route guidance on routes with time-
R
dependent traffic guidance
calculation of expected time of arrival
R
Switching automatic time on and off
Automatic Time Settings
The
used to activate or deactivate the automatic
setting of the time and date. This function is
activated when the vehicle leaves the factory.
Press the Ø button.
X
or
Vehicle
Press in the main function bar.
X
The vehicle menu is displayed.
Area.
To select Time: slide 6, turn and press
X
the controller to confirm.
A menu appears.
To select
X
press the controller.
To switch the function on O or off ª:
X
press the controller.
Setting the time zone
To set the time zone, the
Settings
( page 49).
Y
Press the Ø button.
X
or
Vehicle
Press
X
The vehicle menu is displayed.
To select Time: slide 6, turn and press
X
the controller to confirm.
A menu appears.
To select
X
controller.
A list of countries appears. The # dot indi-
cates the current setting.
Select the country you are currently in by
X
turning and pressing the controller.
The country is accepted.
A time zone list may also be displayed,
function is
depending on the country selected.
To select the desired time zone: turn and
X
press the controller.
The time zone is accepted.
A list of available options for setting sum-
mer time appears (
Time settings
Automatic Time Settings:
Automatic Time
function must be activated
in the main function bar.
Time Zone:: turn and press the
page 50).
Y
49
Z