Establishing The Connection From The Mobile Phone - Mercedes-Benz COMAND Operating Instructions Manual

To select a mobile phone from the device
X
list: turn the controller and press to con-
firm.
A code is displayed in COMAND and on the
mobile phone.
The code is the same
COMAND: select Yes.
X
Mobile phone: confirm the code. Depend-
X
ing on the mobile phone used, you may
have to confirm the connection to
COMAND and for the PBAP and MAP Blue-
tooth ® profiles. The prompt to confirm may
take up to two minutes to be displayed. You
may also save the confirmation on the
mobile phone (see the manufacturer's
operating instructions).
The mobile phone is now authorized and
connected to COMAND. You can now
speak using the hands-free system.
To ensure an optimum language quality, you
can set the mobile phone's transmission and
reception volume ( page 145).
Y
The code is different
COMAND: select No.
X
The process is canceled. Repeat the
authorization.
Authorization via passkey entry (access
code)
If COMAND has found your mobile phone, you
can authorize (connect) it.
To select a mobile phone from the device
X
list: turn the controller and press to con-
firm.
The input menu for the passkey is dis-
played.
The passkey is a one- to sixteen-digit num-
ber combination which you can choose
yourself.
COMAND: enter the passkey using the
X
character bar.
Connecting/disconnecting a mobile phone
Select ¬ once all the numbers have
X
been entered.
Mobile phone: enter the same passkey
X
and confirm your entry. Depending on the
mobile phone used, you may have to con-
firm the connection to COMAND and for the
PBAP and MAP Bluetooth
prompt to confirm may take up to two
minutes to be displayed. You may also save
the confirmation on the mobile phone (see
the manufacturer's operating instructions).
The mobile phone is now authorized and
connected to COMAND. You can now
speak using the hands-free system.
To ensure an optimum language quality, you
can set the mobile phone's transmission and
reception volume (
Authorization Failed
If the
appears, you may have entered a different
passkey or exceeded the prescribed time
limit. Repeat the procedure.
Some mobile phones require a passkey
i
with four or more digits.
If you wish to re-authorize the mobile
i
phone after de-authorizing it, you can
choose another passkey for it.
Mercedes-Benz recommends de-authori-
i
zation in COMAND and on the mobile
phone (
zation may otherwise fail.
Establishing the connection from the
mobile phone
The Bluetooth
"MB Bluetooth".
COMAND: call up the telephone menu.
X
To switch to the menu bar: slide 6 the
X
controller.
To select
X
the controller.
The device list is displayed.
®
profiles. The
page 145).
Y
message
page 145). Subsequent authori-
Y
®
device name of COMAND is
Connect Device: turn and press
143
Z