Setting The Sound Profile - Mercedes-Benz COMAND Operating Instructions Manual

Burmester
Changing loudspeaker source
Select Sound Source
specifies which seat-
based media source shall be output on the
speaker system.
Example: a media source is being listened to
using headphones in Driver.
Select Sound Source
be selected in
same media source is to be listened to using
the sound system.
Call up the sound menu (
X
Turn the controller until
X
Source
is in the center.
Slide 6 the controller.
X
Rotary menus for the speaker source are
activated.
To set the desired speaker source: turn the
X
controller.
The segment, text and image show the
selected setting.
To return to the menu: slide 5 the con-
X
troller.
To return to the basic menu: press the %
X
button briefly.
® high-end 3D surround sound system
VIP & BAL selection
The
used to select sound optimization for a spe-
cific seat, e.g.
Call up the sound menu (
X
Driver
must
Turn the controller until
X
Selection
if the
To activate the left-hand rotary menu to
X
switch
page 253).
Y
slide 6 the controller.
Select Sound
To activate
X
the controller until
To activate the right-hand rotary menu:
X
slide 9 the controller.
To set the desired
X
turn the controller.
The segment, text and image show the
selected setting, e.g. for
To return to the menu: slide 5 the con-
X
troller.
To return to the basic menu: press the %
X
button briefly.

Setting the sound profile

With the
select between five defined sound settings.
VIP & BAL Selection
setting can be
Rear Left.
Y
VIP & BAL
is in the center.
VIP & BAL Selection
VIP & BAL Selection: turn
On
is active.
VIP & BAL
Rear
Sound Profile
setting, you can
255
page 253).
on and off:
Selection:
Left.