Connecting/Disconnecting A Mobile Phone; Telephony - Mercedes-Benz COMAND Operating Instructions Manual

Connecting/disconnecting a mobile phone

140
To enter characters using the touchpad (if
B
available)
To display the phone book
C
Symbols : to = and A are not shown until
after a mobile phone has been connected to
COMAND. The symbols depend on your
mobile phone and your mobile phone network
provider. Further information on connecting a
mobile phone ( page 140).
Y
Symbol ; shows the current signal strength
of the mobile phone network. If all bars are
filled, you have optimum reception.
If no bars are shown, reception is either very
poor or there is none at all.
Receiver icon shows whether a call is
i
active/being connected ¡ or not ¢.
Calling up the telephone menu:
Press %.
X
Showing the menu bar:
Slide 6 the controller.
X
If the mobile phone connected supports the
profile (Message Access
®
MAP Bluetooth
Profile), the 1 menu item is available. Fur-
ther information on text messages and e-mail
( page 158).
Y
If you have an unread text message or e-mail,
the 0 mail symbol is displayed in the sta-
tus bar. The symbol disappears once you have
read the text message or e-mail. The ú
symbol is displayed as soon as the message
memory on the connected mobile phone is
full. The symbol disappears once you delete
at least one message.
Connecting/disconnecting a mobile
phone
Prerequisites
For telephony via the Bluetooth
you require a Bluetooth
phone. The mobile phone must support
Hands-Free Profile 1.0 or above.
On COMAND
X
X
On the mobile phone
X
X
X
The device names for all of one manufactur-
er's products might be identical. To make it
possible to clearly identify your mobile phone,
change the device name (see the manufac-
turer's operating instructions). The name can
be freely selected.
If the mobile phone supports the PBAP
(Phone Book Access Profile) and MAP
(Message Access Profile) Bluetooth
files, the following information will be trans-
mitted after you connect:
R
R
R
The battery of the mobile phone should
always be kept sufficiently charged in order to
prevent malfunctions.
i
®
interface,
®
-capable mobile
Activate Bluetooth ® ( page 55).
Y
Switch on NFC ( page 55).
Y
Switch on the mobile phone and enter the
PIN when prompted to do so (see the man-
ufacturer's operating instructions).
Activate Bluetooth ® and, if necessary,
Bluetooth ® visibility for other devices (see
the manufacturer's operating instructions).
This visibility is for restricted periods of
time on some mobile phones (see the man-
ufacturer's operating instructions).
Set the Bluetooth ® device name for the
mobile phone if necessary.
Phone book
Call lists
Messages
Not all mobile phones available on the
market are equally suitable. You can obtain
more detailed information about suitable
mobile phones and about the connection
between the mobile phone and COMAND
on the Internet at
www.mercedes-benz-mobile.com.
You can also obtain more information by
calling.
In the USA, you can get in touch with the
Mercedes-Benz Customer Assistance Cen-
® pro-