Mercedes-Benz COMAND Operating Instructions Manual page 55

To switch to the menu bar: slide 6 the
X
controller.
System Settings.
Select
X
The system settings menu is shown.
Select WiFi.
X
The WiFi menu appears.
Connect via WPS
Select
X
Select the vehicle from the device to be
X
connected and "Connect using WPS PIN".
The vehicle is displayed with the SSID
WLAN XXXXX.
The device to be connected generates a
PIN.
This PIN is also entered on COMAND.
X
Connecting a device via WPS PBC
Prerequisite:
For this type of connection, the device to be
connected must support "Connect via push
button".
Press the Ø button.
X
or
Vehicle
Press in the main function bar.
X
The vehicle menu is displayed.
To switch to the menu bar: slide 6 the
X
controller.
System Settings.
Select
X
System Settings
The
Select WiFi.
X
The WiFi menu appears.
Connect via WPS
Select
X
Select the vehicle from the device to be
X
connected and "Connect via WPS PBC".
The vehicle is displayed with the SSID
WLAN
Select
X
Connecting the device via SSID and
security key
PIN.
MB
Press the Ø button.
X
or
Press
X
The vehicle menu is displayed.
To switch to the menu bar: slide 6 the
X
controller.
Select
X
The system settings menu is shown.
Select WiFi.
X
The WiFi menu appears.
Select
X
Select the vehicle from the device to be
X
connected. The vehicle is displayed with
the SSID
Enter the security key that appears on the
X
COMAND display for the device to be con-
nected.
Confirm the entry.
X
menu is displayed.
PBC.
XXXXX.
Continue
in COMAND.
Vehicle
in the main function bar.
System Settings.
Connect Using Security
MB WLAN XXXXX.
WiFi
53
MB
Key.
Z