Date - Mercedes-Benz Audio 20 Operating Instructions Manual

Time settings
22
Design
Day Mode
Night Mode
Auto
Switching the display on/off
Press the Ø button.
X
To select Display
X
press the controller.
The display goes out.
or
Press the _ button on the controller.
X
The display goes out.
To switch the display on again: press the
X
controller.
Time settings
General information
Vehicles with a GPS module: the multimedia
system can automatically set the time and date.
The following navigation system functions
require the time, time zone and summer/stand-
ard time to be set correctly in order to work
properly:
route guidance on routes with time-depend-
R
ent traffic guidance
calculation of expected time of arrival
R
Vehicles without a GPS module: you can man-
ually set the time and date with the multimedia
system.
Switching automatic time on and off
The Automatic Time Settings
only available in vehicles with a GPS module.
Explanation
The display is set perma-
nently to day design.
The display is set perma-
nently to night design.
In the Auto setting, the
multimedia system evalu-
ates the readings from the
automatic vehicle light
sensor and automatically
switches the display
design.
Off: slide 6, turn and
function is
The Automatic Time Settings
used to activate or deactivate the automatic
setting of the time and date. This function is
activated when the vehicle leaves the factory.
Press the Ø button.
X
or
Press Vehicle in the main function bar.
X
The vehicle menu is displayed.
To select Time: slide 6, turn and press the
X
controller.
A menu appears.
To select Automatic Time
X
the controller.
To switch the function on O or off ª: press
X
the controller.
Setting the time zone
The Time Zone: function is only available in
vehicles with a GPS module.
To set the time zone, the
Settings function must be activated.
Press the Ø button.
X
or
Press Vehicle in the main function bar.
X
The vehicle menu is displayed.
To select Time: slide 6, turn and press the
X
controller.
A menu appears.
To select Time Zone:: turn and press the
X
controller.
A list of countries appears. The # dot indi-
cates the current setting.
Select the country you are currently in by
X
turning and pressing the controller.
The country is accepted.
A time zone list may also be displayed,
depending on the country selected.
To select the desired time zone: turn and
X
press the controller.
The time zone is accepted.
A list of available options for setting summer
time appears ( page 22).
Y
Setting summer and standard time
The Daylight Saving Time
able in all countries. The
only available in vehicles with a GPS module.
function is
Settings: press
Automatic Time
menu is not avail-
Automatic function is