Mercedes-Benz COMAND Operating Instructions Manual page 32

SPLITVIEW
30
can be made from both sides. In this case,
the last setting made takes precedence.
Requirement for Internet use (USA):
R
mbrace must be activated for Internet
access in COMAND on the driver's side
( page 176).
Y
Requirement for Internet use (Canada): a
R
mobile phone must be connected via Blue-
®
tooth or USB to COMAND on the driver's
side ( page 176).
Y
The Internet can be separately used by both
R
the driver and front passenger at the same
time.
The multifunction steering wheel can be
R
used to control the functions which relate
to the driver's side, but not for the front-
passenger side.
The driver can lock or unlock the other
R
screens (override feature) (
Switching SPLITVIEW on/off
From the driver's side
To activate: press the Ø button.
X
The Vehicle menu appears.
Slide 6 the controller.
X
The menu bar is shown.
ICON_SplitView
To select
X
press the controller.
The ù SPLITVIEW symbol appears in the
status bar. The menu item in the lower
menu bar changes to ù Off.
The front passenger sees the display of the
function last activated. If the switch-on
time was longer than 30 minutes previ-
ously, the display from the driver's side is
shown.
To deactivate: select ù
X
and pressing the controller.
The display changes to
On.
ù is hidden in the status bar.
To lock/unlock SPLITVIEW: proceed as
X
described under "Locking/unlocking the
rear-compartment displays" (
Instead of selecting a rear-compartment
display, select SplitView.
From the front-passenger side
page 76).
Y
Operation takes place via the COMAND
remote control (
To activate: select the SPLITVIEW display
X
by turning thumbwheel : until the SPLIT-
VIEW icon appears in the window.
Press the u button.
X
To deactivate: press button u.
X
On, turn and
The display changes to
On.
The SPLITVIEW symbol is hidden in the sta-
tus bar.
The menu called up on the driver's side is
shown.
Off
by turning
ICON_SplitView
page 76).
Y
page 273).
Y
ICON_SplitView