Mercedes-Benz COMAND Operating Instructions Manual page 42

Character entry (navigation)
40
field. COMAND supports this using a hand-
writing recognition function.
Entering characters using the charac-
ter bar
Characters entered by the user
:
(orange)
Characters automatically added by
;
EBÜLL
COMAND
To switch to keyword search
=
Characters not currently available
?
Currently selected character
A
Characters currently available
B
Character bar
C
The example shows the address entry
( page 88).
Y
To select a character: turn and press the
X
controller.
Selected character : is entered in the
upper line. COMAND adds the missing
characters and shows the entry that best
matches the current input.
The characters are available B or not ?,
depending on the characters already
entered and the data stored in the digital
map.
The G symbol indicates that an entry
exists more than once.
Alternatively, depending on the vehicle
i
equipment, you can enter characters using
the telephone keypad or the touchpad.
To delete a character: slide 6 and turn
X
the controller, then press it after selecting
F.
To delete an entire entry: slide 6 and
X
turn the controller; then after selecting F
press and hold down the controller until the
entire entry is deleted.
Alternatively, you can also delete the
i
entry using the telephone keypad.
To switch to keyword search: slide 6
X
and turn the controller, then press it after
selecting = (
To confirm an entry: slide 6 and turn
X
the controller, then press it after select-
ing¬.
STUT
or
Slide 5 the controller repeatedly until the
X
character bar disappears.
The location selection list appears. The
selected entry is highlighted.
Cursor
:
Entry line
;
The example shows the character entry when
you save a destination as a navigable contact
in the address book (
To select an input line: slide 6 and turn
X
the controller, then press it after selecting
4 or 5.
or
Slide 5 the controller repeatedly until the
X
character bar disappears.
Turn and press the controller.
X
page 91).
Y
page 89).
Y